Inspiration October

The base card is 6" x 6" (152mm x 152mm)

  • The card base was made from a 12" x12" (305mm x 305mm) piece of Crafters Companion Snow White Hint of Gold card.
  • Score the card from one end at 3" and 6" (76mm x 152mm) and fold and burnish the folds well with a bone folder.
  • The edges of the "gates' were rounded.
  • All the edges of the card were edged with Encore Ultimate Metallic Gold and dried with a heat gun.
  • Cut two of the Papercuts die - Holly Berry Edger in red card and two in gold card.
  • Line up one red and one gold diecut on top of each other and then move the gold die cut slightly down and slightly past the fancy edge to create a shadow effect.
  • Adhere together.
  • Turn the second pair of diecuts 180° and repeat as above.
  • Attach a piece of ribbon or mesh to the outer edges of card. With this card the ribbon goes under the edge of the diecut to the straight edge so that it shows beneath the diecut.
  • Attach the pairs of diecuts so that the fancy edge is close to the edges of the 'gates'. If using ribbon or mesh, glue is easy to use and usally stays in place.
  • Add a piece of contrasting card on the inside and add your message. 

Don't Miss Out, Get All The News

Once a week we send out a newsletter with all the latest products, special offers and workshop information.

Subscribe Me  

You can unsubscribe with one click and we never share you email address.